OEE Calculator for Tyre and Rubber Manufacturing
For tyre building, curing and rubber moulding machines with long cycles and heavy changeovers.
This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.
Your numbers
Updates as you typeYour result
Free, no sign-upGet your full OEE loss report
Your results as a PDF, the six big losses broken down, plus our free OEE Loss Tracker (Excel) to log every shift and machine.
- Your result above stays free. You never need to sign up to calculate.
Your report is on its way.
Want help reading it?
Book a 30-minute OEE review with our teamWe've also emailed you the links.
How this OEE calculator works for Tyre and Rubber
OEE (overall equipment effectiveness) is the share of planned production time that produced good tyres at full speed. It multiplies availability (run time ÷ planned production time), performance (ideal cycle time × total count ÷ run time) and quality (good count ÷ total count). Planned production time is the shift length minus planned stops. The general explanation is on the OEE calculator page.
OEE = Availability × Performance × Quality
Worked example
A tyre plant runs a passenger-car tyre building machine on an 8-hour shift. In the calculator above this is the starting example: a shift of 480 minutes with 45 minutes of planned stops, so planned production time is 435 minutes. Downtime takes 60 minutes, so run time is 375 minutes. The ideal cycle time is 75 seconds (1.25 minutes) per tyre. The line makes 255 tyres, of which 241 are good.
| Factor | Calculation | Result |
|---|---|---|
| Availability | 375 ÷ 435 | 86.2% |
| Performance | (1.25 min × 255) ÷ 375 | 85.0% |
| Quality | 241 ÷ 255 | 94.5% |
| OEE | 86.2% × 85.0% × 94.5% | 69.3% |
The losses that matter in Tyre and Rubber
Tyre and rubber plants combine heavy mixing, building and curing equipment with long cycles, so one stop affects many downstream machines.
| Loss in Tyre and Rubber | Counted in | What it looks like |
|---|---|---|
| Size and mould changes | Availability | Changing bead rings, drums, moulds or bladders between tyre sizes |
| Mixer, extruder and calender breakdowns | Availability | Stops upstream that starve the building machines |
| Waiting for components | Performance | Building machine starved of treads, beads or plies |
| Slow cycles | Performance | Operators or machines running above the design cycle time |
| Building and curing defects | Quality | Tyres scrapped or downgraded for air traps, poor bonding or uneven cure |
| Rework and re-inspection | Quality | Tyres that need repair before they can be dispatched |
Measuring OEE properly in Tyre and Rubber
Measure OEE on the bottleneck of the flow, which is often the curing press or the building machine, and keep the unit consistent: tyres, not shots or moulds. A press that has been heated and held without producing is availability loss, not planned time. Count a downgraded tyre as not good if it cannot be sold as first quality. No verified public OEE benchmark for tyre or rubber manufacturing was found, so none is quoted.
What do published figures say about OEE in Tyre and Rubber?
No verifiable source publishes an OEE figure for tyre or rubber manufacturing, so none is quoted here. The general references are:
- The 85% reference comes from Nakajima’s 1984 book on total productive maintenance; oee.com notes it was set for discrete manufacturing. oee.com
- Evocon’s data from 3,500+ machines puts the typical plant nearer 55–60%. Evocon
For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.
How maintenance software helps
- Track moulds, bladders and drums as individual assets with their usage, so wear is planned for and not discovered by a defect.
- Schedule preventive maintenance on presses, steam and hydraulic systems and mixers, with their shutdown windows in the plan.
- Record stops with a cause code to separate size changes, component shortages and machine faults.
More for Tyre and Rubber
- Maintenance software for Tyre and Rubber
- Preventive maintenance schedule for Plastics, rubber & polymers
- OEE software
- Downtime cost calculator
- MTTR and MTBF calculator
- OEE calculator
OEE calculators for other industries
Not your industry? Pick another one below, or search at the top of the page.
Process plants: continuous and batch How it is calculated
- CementCement, glass, ceramics & building materials
- Steel and MetalsSteel, foundry, forging & metals
- MiningMining & mineral processing
- Oil and GasOil, gas & refining
- Chemicals and FertilisersChemicals, fertilisers & petrochemicals
- Paper and PulpPaper, pulp & board
- Sugar and DistilleriesAgro, grain, edible oil & sugar
- DairyFood, dairy & beverage processing
- Food ProcessingFood, dairy & beverage processing
- API and Bulk DrugsAPI & bulk drugs
- TextileTextile & garments
Production lines: parts, packs and units How it is calculated
- Auto ComponentsAutomotive & auto components
- ElectronicsElectronics & electrical manufacturing
- FMCGFMCG & consumer goods
- PackagingPackaging, paper & printing
- PlasticsPlastics, rubber & polymers
- PharmaceuticalPharmaceutical & biotech
Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.