NEWPlantOps360 AI Copilot is here — auto-draft work orders & surface answers from your plant data. See what's new →
Product Industries Pricing Blog Support Center Free tools Preventive Maintenance Schedules For Enterprises Support

OEE Calculator for FMCG

For high-speed filling, wrapping and cartoning lines with frequent SKU changeovers.

This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.

Your numbers

Updates as you type

Time

Total length of the shift

Breaks, meetings, scheduled maintenance

Breakdowns, changeovers and other unplanned stops

Output

Seconds per pack at the line’s rated speed (60 ÷ rated packs per minute)

Good and rejected packs

Packs that passed weight, seal and coding checks first time

Your result

Free, no sign-up

Check the highlighted fields to see your result.

Get your full OEE loss report

Your results as a PDF, the six big losses broken down, plus our free OEE Loss Tracker (Excel) to log every shift and machine.

  • Your result above stays free. You never need to sign up to calculate.

By submitting, you agree to be contacted about PlantOps360. See our Privacy Policy.

How this OEE calculator works for FMCG

OEE (overall equipment effectiveness) is the share of planned production time that produced good packs at full speed. It multiplies availability (run time ÷ planned production time), performance (ideal cycle time × total count ÷ run time) and quality (good count ÷ total count). Planned production time is the shift length minus planned stops. The general explanation is on the OEE calculator page.

OEE = Availability × Performance × Quality

Worked example

A personal-care plant runs a sachet filling and cartoning line on an 8-hour shift. In the calculator above this is the starting example: a shift of 480 minutes with 45 minutes of planned stops, so planned production time is 435 minutes. Downtime takes 70 minutes, so run time is 365 minutes. The ideal cycle time is 1.5 seconds (0.03 minutes) per pack. The line makes 11900 packs, of which 11600 are good.

FactorCalculationResult
Availability365 ÷ 43583.9%
Performance(0.03 min × 11900) ÷ 36581.5%
Quality11600 ÷ 1190097.5%
OEE83.9% × 81.5% × 97.5%66.7%

The losses that matter in FMCG

FMCG lines run fast and change SKU often. Many stops last seconds, and a line can lose more to those than to any one breakdown.

Loss in FMCGCounted inWhat it looks like
SKU and pack-size changeoverAvailabilityCleaning, format parts and trial packs between one product and the next
Film, carton and label supply stopsAvailabilityLine waiting for packing material or a reel change
Jams at the wrapper, cartoner or conveyorPerformanceShort stops cleared by an operator, many times a shift
Running below rated speedPerformanceLine slowed to avoid jams or to match a weaker downstream machine
Checkweigher and seal rejectsQualityPacks removed because of weight, seal, print or coding faults
Start-up wasteQualityProduct and material wasted until the line is stable after a stop

Measuring OEE properly in FMCG

Use the rated speed of the line (often set by the slowest machine) as the ideal rate, converted to seconds per pack. On a fast line a stop of ten seconds is easy to miss by hand, so a manual log understates downtime and overstates OEE; this is a well-known effect across industries. oee.com also notes that a multi-product line tends to lose far more availability to changeovers than a single-product line, so compare lines that run a similar product mix.

What do published figures say about OEE in FMCG?

No verifiable source publishes an OEE figure for FMCG alone, so none is quoted here. What is well documented is how measurement changes the number:

  • Evocon removed every reading above 100% from its dataset of 3,500+ machines because they signal a wrong calculation, and warns that understated ideal cycle times inflate OEE. Evocon
  • oee.com notes that multi-product lines are likely to lose far more availability to changeovers. oee.com

For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.

How maintenance software helps

  • Record every stop on the line with a cause code, so changeovers, material waits and jams are separated and ranked.
  • Schedule preventive maintenance on fillers, sealers and wrappers by hours run, so wear parts are replaced in a planned stop.
  • Track spare parts for the fast-wearing items (knives, belts, sensors), so a small stop does not become a long one.

More for FMCG

OEE calculators for other industries

Not your industry? Pick another one below, or search at the top of the page.

Process plants: continuous and batch How it is calculated

Production lines: parts, packs and units How it is calculated

Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.

Frequently asked questions

How do I calculate OEE for a line with many SKUs?
Use the rated speed for each SKU if the speeds differ a lot, or the speed of the slowest SKU you run most. Keep the choice the same over time and count each changeover as downtime.
Why is my FMCG OEE higher on paper than the plant feels?
Manual logs miss short stops, which pushes availability and performance up. Recording every stop, even briefly, usually lowers OEE and shows the real losses.
Should start-up waste count as a quality loss?
Yes. Packs or product wasted until the line is stable are not good output, so they are a quality loss.
What is a good OEE for FMCG?
There is no audited benchmark for this industry. The 85% figure was set for discrete manufacturing, and across industries the typical plant is nearer 55–60%. Compare your line with its own trend, using the same definitions each time.
How do you calculate OEE for FMCG?
Multiply availability (run time divided by planned production time), performance (ideal cycle time times total count divided by run time) and quality (good count divided by total count).

Want help reading your OEE results?

Book a 30-minute OEE review with our team
PlantOps360

See PlantOps360 on your plant data

Book a 30-minute guided walkthrough tailored to your maintenance operations.

Personalized to your assets & workflows
See AI work orders & BI live
No commitment — bring your questions
Your details stay private. No spam, ever.