OEE Calculator for API and Bulk Drug Plants
For reactor trains and batch plants: rated yield per batch time, and cleaning and changeover made visible.
This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.
Your numbers
Updates as you typeYour result
Free, no sign-upGet your full OEE loss report
Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.
- Your result above stays free. You never need to sign up to calculate.
Your report is on its way.
Want help reading it?
Book a 30-minute OEE review with our teamWe've also emailed you the links.
How this OEE calculator works for API and Bulk Drugs
OEE (overall equipment effectiveness) is the share of what a reactor train could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.
OEE = Availability × Performance × Quality
Worked example
An API plant runs a reactor train over a 30-day month. The design batch is 1,200 kilograms in 24 hours, so the rated rate is 50 kilograms an hour. In the calculator above this is the starting example: a period of 720 hours with 48 hours of planned shutdown, so planned production time is 672 hours. Unplanned stops take 96 hours, so the plant runs for 576 hours. It makes 24000 kg of API, of which 22800 kg of API are on-spec, against a rated rate of 50 kg of API an hour.
| Factor | Calculation | Result |
|---|---|---|
| Availability | 576 ÷ 672 | 85.7% |
| Performance | (24000 ÷ 576) ÷ 50 | 83.3% |
| Quality | 22800 ÷ 24000 | 95.0% |
| OEE | 85.7% × 83.3% × 95.0% | 67.9% |
Against the whole 720 hours the plant ran 80.0% of the time (the on-stream factor) and TEEP is 63.3%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.
The losses that matter in API and Bulk Drugs
A batch plant has no single cycle time, and cleaning, changeover and waiting for QC release often cost more than breakdowns. The standard formula for discrete parts does not fit, which is why the rated rate here is built from batch yield and batch time.
| Loss in API and Bulk Drugs | Counted in | What it looks like |
|---|---|---|
| Cleaning and changeover overruns | Availability | Equipment cleaning between products that takes longer than the standard |
| Waiting for QC or material | Availability | Reactor idle while a test result or a raw material is awaited |
| Equipment and utility failures | Availability | Reactor, agitator, vacuum, chiller or steam failures during a batch |
| Longer batch times | Performance | Reaction, filtration or drying taking longer than the standard cycle |
| Yield below design | Performance | A batch that makes less than the design yield in the same time |
| Out-of-specification batches | Quality | Batches that fail and need reworking, reprocessing or rejection |
Measuring OEE properly in API and Bulk Drugs
Use the design batch yield divided by the standard batch time as the rated rate, and count charging, reaction and discharge as run time. Cleaning and changeover between batches are availability losses unless you plan them in advance and say so. Yield is treated as part of performance here, and a batch that fails specification is a quality loss. A vendor guide to batch OEE says discrete-style OEE on batch plants gives numbers that look fine and do not move, and that a composite above 90% usually means the formula is being misapplied.
What do published figures say about OEE in API and Bulk Drugs?
No audited OEE benchmark for API manufacturing was found. A published view on batch plants:
- A vendor article on batch OEE suggests adapted ranges of 80–92% availability, 88–96% performance, 92–99% quality and 70–82% overall, gives no source for them and notes that benchmarks are unreliable because denominators differ. Fabrico
- oee.com notes that the 85% reference applies to discrete manufacturing, not process industries. oee.com
For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.
How maintenance software helps
- Keep calibration and preventive maintenance of reactors, agitators, instruments and utilities in one schedule, with history ready for audit.
- Record idle and waiting time by cause (cleaning, QC release, material), so avoidable time can be separated from regulated time.
- Schedule preventive maintenance between campaigns, so planned work does not interrupt a batch.
More for API and Bulk Drugs
- Maintenance software for API and Bulk Drugs
- Preventive maintenance schedule for Pharmaceutical & biotech
- OEE software
- Downtime cost calculator
- MTTR and MTBF calculator
- OEE calculator for process industries
OEE calculators for other industries
Not your industry? Pick another one below, or search at the top of the page.
Process plants: continuous and batch How it is calculated
- CementCement, glass, ceramics & building materials
- Steel and MetalsSteel, foundry, forging & metals
- MiningMining & mineral processing
- Oil and GasOil, gas & refining
- Chemicals and FertilisersChemicals, fertilisers & petrochemicals
- Paper and PulpPaper, pulp & board
- Sugar and DistilleriesAgro, grain, edible oil & sugar
- DairyFood, dairy & beverage processing
- Food ProcessingFood, dairy & beverage processing
- TextileTextile & garments
Production lines: parts, packs and units How it is calculated
- Auto ComponentsAutomotive & auto components
- ElectronicsElectronics & electrical manufacturing
- FMCGFMCG & consumer goods
- PackagingPackaging, paper & printing
- PlasticsPlastics, rubber & polymers
- Tyre and RubberTyre & rubber
- PharmaceuticalPharmaceutical & biotech
Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.