OEE Calculator for Food Processing
For cooking, baking, filling and processing lines, with sanitation and changeovers built in.
This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.
Your numbers
Updates as you typeYour result
Free, no sign-upGet your full OEE loss report
Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.
- Your result above stays free. You never need to sign up to calculate.
Your report is on its way.
Want help reading it?
Book a 30-minute OEE review with our teamWe've also emailed you the links.
How this OEE calculator works for Food Processing
OEE (overall equipment effectiveness) is the share of what a processing and packing line could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.
OEE = Availability × Performance × Quality
Worked example
A food plant runs a processing and packing line over a 168-hour week with a rated rate of 3,000 kilograms an hour. In the calculator above this is the starting example: a period of 168 hours with 24 hours of planned shutdown, so planned production time is 144 hours. Unplanned stops take 21 hours, so the plant runs for 123 hours. It makes 300000 kg of product, of which 288000 kg of product are on-spec, against a rated rate of 3000 kg of product an hour.
| Factor | Calculation | Result |
|---|---|---|
| Availability | 123 ÷ 144 | 85.4% |
| Performance | (300000 ÷ 123) ÷ 3000 | 81.3% |
| Quality | 288000 ÷ 300000 | 96.0% |
| OEE | 85.4% × 81.3% × 96.0% | 66.7% |
Against the whole 168 hours the plant ran 73.2% of the time (the on-stream factor) and TEEP is 57.2%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.
The losses that matter in Food Processing
Food lines run mostly continuously, carry mandatory sanitation and deal with raw materials that vary. Rework and giveaway (overfilling) can be large quality losses that are easy to miss.
| Loss in Food Processing | Counted in | What it looks like |
|---|---|---|
| Sanitation and changeover overruns | Availability | Cleaning and product changes that take longer than planned |
| Breakdowns | Availability | Mixers, ovens, conveyors and fillers stopping the line |
| Raw material and packaging shortages | Availability | Line waiting for an ingredient or a pack component |
| Reduced line speed | Performance | Line slowed because of product variation or a weak downstream machine |
| Micro-stops at the filler or wrapper | Performance | Short stops that add up across the day |
| Rework, waste and giveaway | Quality | Product rejected, reworked or overfilled beyond target weight |
Measuring OEE properly in Food Processing
Treat sanitation that follows the standard procedure as a planned stop, and the time beyond it as downtime. Count only product that meets weight and quality checks at first pass as on-spec; overfilled product is a loss you can see in the quality figure if you count giveaway as waste. Manually recorded food-plant OEE usually reads higher than automatically measured OEE because short stops are missed, so record every stop even briefly before comparing with anyone else’s figure.
What do published figures say about OEE in Food Processing?
Published ranges for food processing come from a vendor and are not audited:
- TeepTrak reports 45–60% as typical for food processing in India, with 70% or more as world class; it does not disclose its sample size, data source or calculation method. TeepTrak India benchmark
- Evocon’s data from 3,500+ machines across industries puts the typical plant nearer 55–60%. Evocon
For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.
How maintenance software helps
- Schedule preventive maintenance on mixers, ovens, fillers and conveyors around sanitation windows.
- Record every stop with a cause code, so sanitation overruns, changeovers and breakdowns are ranked separately.
- Keep food-safety-critical items (gaskets, seals, metal detectors, scales) on calibration and replacement schedules with a record.
More for Food Processing
- Maintenance software for Food Processing
- Preventive maintenance schedule for Food, dairy & beverage processing
- OEE software
- Downtime cost calculator
- MTTR and MTBF calculator
- OEE calculator for process industries
OEE calculators for other industries
Not your industry? Pick another one below, or search at the top of the page.
Process plants: continuous and batch How it is calculated
- CementCement, glass, ceramics & building materials
- Steel and MetalsSteel, foundry, forging & metals
- MiningMining & mineral processing
- Oil and GasOil, gas & refining
- Chemicals and FertilisersChemicals, fertilisers & petrochemicals
- Paper and PulpPaper, pulp & board
- Sugar and DistilleriesAgro, grain, edible oil & sugar
- DairyFood, dairy & beverage processing
- API and Bulk DrugsAPI & bulk drugs
- TextileTextile & garments
Production lines: parts, packs and units How it is calculated
- Auto ComponentsAutomotive & auto components
- ElectronicsElectronics & electrical manufacturing
- FMCGFMCG & consumer goods
- PackagingPackaging, paper & printing
- PlasticsPlastics, rubber & polymers
- Tyre and RubberTyre & rubber
- PharmaceuticalPharmaceutical & biotech
Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.