OEE Calculator for Textile and Spinning Mills
For spinning, weaving and processing departments, in kilograms or metres per hour.
This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.
Your numbers
Updates as you typeYour result
Free, no sign-upGet your full OEE loss report
Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.
- Your result above stays free. You never need to sign up to calculate.
Your report is on its way.
Want help reading it?
Book a 30-minute OEE review with our teamWe've also emailed you the links.
How this OEE calculator works for Textile
OEE (overall equipment effectiveness) is the share of what a spinning department could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.
OEE = Availability × Performance × Quality
Worked example
A spinning mill measures its ring frames over a 30-day month with a rated rate of 330 kilograms of yarn an hour for the count it runs. In the calculator above this is the starting example: a period of 720 hours with 24 hours of planned shutdown, so planned production time is 696 hours. Unplanned stops take 70 hours, so the plant runs for 626 hours. It makes 178000 kg of yarn, of which 170000 kg of yarn are on-spec, against a rated rate of 330 kg of yarn an hour.
| Factor | Calculation | Result |
|---|---|---|
| Availability | 626 ÷ 696 | 89.9% |
| Performance | (178000 ÷ 626) ÷ 330 | 86.2% |
| Quality | 170000 ÷ 178000 | 95.5% |
| OEE | 89.9% × 86.2% × 95.5% | 74.0% |
Against the whole 720 hours the plant ran 86.9% of the time (the on-stream factor) and TEEP is 71.6%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.
The losses that matter in Textile
Textile mills run many machines in parallel, and the usual losses are many small stops, count changes and waste, rather than one big machine stopping.
| Loss in Textile | Counted in | What it looks like |
|---|---|---|
| Power failures and breakdowns | Availability | Grid or generator interruptions and machine failures that stop whole sections |
| Count and style changes | Availability | Time to change settings, draft and twist between counts |
| End breaks and low speed | Performance | Frames run below the rated speed, and spindle stops from yarn breaks |
| Waiting for roving or labour | Performance | Machines idle because material or an operator is not there |
| Waste and yarn faults | Quality | Waste, thin and thick places and yarn that is downgraded |
| Rework and reprocessing | Quality | Material that has to be reprocessed to meet the requirement |
Measuring OEE properly in Textile
Set the rated rate for the count and machine you measure, and calculate separately for spinning, weaving and processing, because each measures output differently (kilograms, metres or pieces). Textile mills in India often report spindle utilisation and production per spindle, and these are related to, but not the same as, availability and performance here. Use run time from the machine or section, not from the shift plan.
What do published figures say about OEE in Textile?
Two sources are relevant for India, one from a research association and one from a vendor:
- SITRA’s 36th cost and operational study (October to December 2021) reported spindle utilisation of 94.12% for the average of the mills that took part and 96.98% for the top 20% of mills, and a capacity utilisation of 93.6% rising to 94.8% in the 67 mills that took part in both the 2019 and 2021 studies. These measure spindle time in use, not OEE. SITRA annual report 2021–22
- TeepTrak reports 40–55% as typical for textiles and garments in India, with 65% or more as achievable; it does not disclose its sample size, data source or calculation method. TeepTrak India benchmark
For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.
How maintenance software helps
- Schedule preventive maintenance by running hours on ring frames, looms, cards and compressors, in the planned stops.
- Record stops by cause (power, breakdown, count change, waiting), so power and breakdown losses can be separated from process losses.
- Track spares and wear parts (spindles, rings, travellers, picking parts) in a store, so a small fault is not a long stop.
More for Textile
- Maintenance software for Textile
- Preventive maintenance schedule for Textile & garments
- OEE software
- Downtime cost calculator
- MTTR and MTBF calculator
- OEE calculator for process industries
OEE calculators for other industries
Not your industry? Pick another one below, or search at the top of the page.
Process plants: continuous and batch How it is calculated
- CementCement, glass, ceramics & building materials
- Steel and MetalsSteel, foundry, forging & metals
- MiningMining & mineral processing
- Oil and GasOil, gas & refining
- Chemicals and FertilisersChemicals, fertilisers & petrochemicals
- Paper and PulpPaper, pulp & board
- Sugar and DistilleriesAgro, grain, edible oil & sugar
- DairyFood, dairy & beverage processing
- Food ProcessingFood, dairy & beverage processing
- API and Bulk DrugsAPI & bulk drugs
Production lines: parts, packs and units How it is calculated
- Auto ComponentsAutomotive & auto components
- ElectronicsElectronics & electrical manufacturing
- FMCGFMCG & consumer goods
- PackagingPackaging, paper & printing
- PlasticsPlastics, rubber & polymers
- Tyre and RubberTyre & rubber
- PharmaceuticalPharmaceutical & biotech
Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.