NEWPlantOps360 AI Copilot is here — auto-draft work orders & surface answers from your plant data. See what's new →
Product Industries Pricing Blog Support Center Free tools Preventive Maintenance Schedules For Enterprises Support

OEE Calculator for Steel Plants and Rolling Mills

For melt shops, casters and rolling mills, in tonnes per hour rather than parts.

This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.

Your numbers

Updates as you type

Time

All calendar hours in the period: 24 for a day, 720 for a 30-day month

Planned maintenance days and scheduled roll or stand changes, left out of OEE

Cobbles, breakdowns, roll-change overruns, furnace and utility stops outside the plan

Output

Rated mill rate: tonnes per hour of rolled product at the section being rolled

Everything produced in the period, on-spec or not, in tonnes of steel

Rolled tonnes that met dimension and grade requirements first time (not rejected or downgraded)

Your result

Free, no sign-up

Check the highlighted fields to see your result.

Get your full OEE loss report

Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.

  • Your result above stays free. You never need to sign up to calculate.

By submitting, you agree to be contacted about PlantOps360. See our Privacy Policy.

How this OEE calculator works for Steel and Metals

OEE (overall equipment effectiveness) is the share of what a rolling mill could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.

OEE = Availability × Performance × Quality

Worked example

A hot rolling mill has a rated rate of 90 tonnes an hour on the section being rolled and runs through a 30-day month. In the calculator above this is the starting example: a period of 720 hours with 60 hours of planned shutdown, so planned production time is 660 hours. Unplanned stops take 110 hours, so the plant runs for 550 hours. It makes 40500 tonnes of steel, of which 38200 tonnes of steel are on-spec, against a rated rate of 90 tonnes of steel an hour.

FactorCalculationResult
Availability550 ÷ 66083.3%
Performance(40500 ÷ 550) ÷ 9081.8%
Quality38200 ÷ 4050094.3%
OEE83.3% × 81.8% × 94.3%64.3%

Against the whole 720 hours the plant ran 76.4% of the time (the on-stream factor) and TEEP is 59.0%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.

The losses that matter in Steel and Metals

Steel plants run hot, heavy equipment where a stop can scrap material that is already in the furnace or on the table. Rolling mills also change section often, and each change moves the rated rate.

Loss in Steel and MetalsCounted inWhat it looks like
Cobbles and mill jamsAvailabilityA product jam that stops the mill and often scraps the rolled length
Roll and guide changes beyond planAvailabilityA change that takes longer than the standard time
Furnace and utility stopsAvailabilityReheating furnace, water, power or air problems that stop the mill
Rolling below rated ratePerformanceSlow rolling because of furnace temperature, section changes or cautious operators
Waiting for billets or slabsPerformanceMill starved by the melt shop or the furnace
Rejects, downgrades and cut-offsQualityProduct that fails dimension, surface or grade, plus ends cut off and scrapped

Measuring OEE properly in Steel and Metals

The rated rate changes with the section, so calculate OEE for one section or product family at a time, or use a weighted rated rate and say so. Count tonnes after cuts and rejects as on-spec, and tonnes charged or rolled as the total. Keep planned maintenance days out of planned production time. Different parts of a steel plant measure different things: a blast furnace is judged on availability and campaign life, a rolling mill on rate and yield, and the calculator is best used on one mill or caster at a time.

What do published figures say about OEE in Steel and Metals?

Published OEE figures for steel conflict with each other, and no figure from an independent source such as an industry association was found:

  • Vendor tables for steel and rolling mills differ by up to about 20 points between sources, with different definitions of availability, so they are not quoted here.
  • oee.com notes that the 85% reference applies to discrete manufacturing, not process industries. oee.com

For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.

How maintenance software helps

  • Record every mill stop with a cause code (cobble, roll change, furnace, drive), so the stops that cost the most tonnes are clear.
  • Plan preventive maintenance on stands, gearboxes, drives and reheating furnaces so it fits the planned maintenance window.
  • Track roll and bearing life as assets, so changes are planned and not forced by a failure.

More for Steel and Metals

OEE calculators for other industries

Not your industry? Pick another one below, or search at the top of the page.

Process plants: continuous and batch How it is calculated

Production lines: parts, packs and units How it is calculated

Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.

Frequently asked questions

Should I calculate OEE for the whole steel plant?
No. Calculate it per unit: melt shop, caster, rolling mill. A plant-wide figure hides which unit limits output and mixes different definitions of rate and quality.
How do I handle different sections on one mill?
Calculate OEE for one section at a time, or use a weighted rated rate for the mix and state it. The rated rate for a light section is not the same as for a heavy one.
Do roll changes count as downtime?
Standard roll changes are often treated as planned. Time beyond the standard is downtime. Choose a rule and apply it every time.
What is a good OEE for Steel and Metals?
There is no audited benchmark for this industry. The 85% figure was set for discrete manufacturing, and across industries the typical plant is nearer 55–60%. Compare your line with its own trend, using the same definitions each time.
How do you calculate OEE for Steel and Metals?
Multiply availability (run time divided by planned production time), performance (actual rate while running divided by the rated rate) and quality (on-spec output divided by total output). Planned shutdowns are left out of planned production time.

Want help reading your OEE results?

Book a 30-minute OEE review with our team
PlantOps360

See PlantOps360 on your plant data

Book a 30-minute guided walkthrough tailored to your maintenance operations.

Personalized to your assets & workflows
See AI work orders & BI live
No commitment — bring your questions
Your details stay private. No spam, ever.