OEE Calculator for Sugar Mills and Distilleries
For a crushing season or a distillery campaign, in tonnes and hours rather than parts.
This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.
Your numbers
Updates as you typeYour result
Free, no sign-upGet your full OEE loss report
Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.
- Your result above stays free. You never need to sign up to calculate.
Your report is on its way.
Want help reading it?
Book a 30-minute OEE review with our teamWe've also emailed you the links.
How this OEE calculator works for Sugar and Distilleries
OEE (overall equipment effectiveness) is the share of what a sugar mill could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.
OEE = Availability × Performance × Quality
Worked example
A sugar mill measures its sugar house over a 150-day crushing season, 3,600 hours, with a rated rate of 50 tonnes of sugar an hour. In the calculator above this is the starting example: a period of 3600 hours with 120 hours of planned shutdown, so planned production time is 3480 hours. Unplanned stops take 420 hours, so the plant runs for 3060 hours. It makes 128000 tonnes of sugar, of which 122000 tonnes of sugar are on-spec, against a rated rate of 50 tonnes of sugar an hour.
| Factor | Calculation | Result |
|---|---|---|
| Availability | 3060 ÷ 3480 | 87.9% |
| Performance | (128000 ÷ 3060) ÷ 50 | 83.7% |
| Quality | 122000 ÷ 128000 | 95.3% |
| OEE | 87.9% × 83.7% × 95.3% | 70.1% |
Against the whole 3600 hours the plant ran 85.0% of the time (the on-stream factor) and TEEP is 67.8%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.
The losses that matter in Sugar and Distilleries
A sugar mill runs only for a season, so every hour lost in the season is hard to win back. Cane quality, the milling train, boilers and the sugar house each have their own losses.
| Loss in Sugar and Distilleries | Counted in | What it looks like |
|---|---|---|
| Milling train and boiler breakdowns | Availability | A stop in the mills, boiler or turbine that stops cane crushing or processing |
| Cane supply gaps | Availability | Hours lost because cane has not arrived, which is a real loss in the season |
| Cleaning overruns | Availability | Weekly cleaning that runs beyond the planned time |
| Crushing below the rated rate | Performance | Slow milling because of cane quality, feed or roller problems |
| Centrifugal and pan limits | Performance | The sugar house limiting the whole mill |
| Downgraded sugar and re-melt | Quality | Sugar that misses grade and is re-melted or sold at a lower grade |
Measuring OEE properly in Sugar and Distilleries
Measure a season, a month or a week, but state which, and use the hours the mill was actually available to crush, not the calendar of the whole year. Decide whether a lack of cane counts as a stop: it is a real loss for the mill, so most mills count it. A season-based plant also reports capacity utilisation and recovery, which this calculator does not replace. Choose a single section (crushing or the sugar house) and keep the unit, tonnes of cane or tonnes of sugar, the same throughout.
What do published figures say about OEE in Sugar and Distilleries?
No verified public OEE benchmark for sugar mills was found, so none is quoted. What can be said:
- Indian sugar mills usually report capacity utilisation and crushing days for the season; the on-stream factor in this calculator is a comparable measure for the hours the mill was running.
- oee.com notes that the 85% reference applies to discrete manufacturing, not process industries. oee.com
For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.
How maintenance software helps
- Prepare the off-season overhaul in advance: work orders, spares and contractors planned before the season starts.
- Record every stop in the season with a cause code, so the mills, boilers and turbines that cost the most crushing hours are visible.
- Schedule preventive maintenance on mills, rollers, centrifugals and boilers by running hours, in the planned cleaning stops.
More for Sugar and Distilleries
- Maintenance software for Sugar and Distilleries
- Preventive maintenance schedule for Agro, grain, edible oil & sugar
- OEE software
- Downtime cost calculator
- MTTR and MTBF calculator
- OEE calculator for process industries
OEE calculators for other industries
Not your industry? Pick another one below, or search at the top of the page.
Process plants: continuous and batch How it is calculated
- CementCement, glass, ceramics & building materials
- Steel and MetalsSteel, foundry, forging & metals
- MiningMining & mineral processing
- Oil and GasOil, gas & refining
- Chemicals and FertilisersChemicals, fertilisers & petrochemicals
- Paper and PulpPaper, pulp & board
- DairyFood, dairy & beverage processing
- Food ProcessingFood, dairy & beverage processing
- API and Bulk DrugsAPI & bulk drugs
- TextileTextile & garments
Production lines: parts, packs and units How it is calculated
- Auto ComponentsAutomotive & auto components
- ElectronicsElectronics & electrical manufacturing
- FMCGFMCG & consumer goods
- PackagingPackaging, paper & printing
- PlasticsPlastics, rubber & polymers
- Tyre and RubberTyre & rubber
- PharmaceuticalPharmaceutical & biotech
Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.