NEWPlantOps360 AI Copilot is here — auto-draft work orders & surface answers from your plant data. See what's new →
Product Industries Pricing Blog Support Center Free tools Preventive Maintenance Schedules For Enterprises Support

OEE Calculator for Paper Mills and Pulp Plants

For paper and board machines and pulp lines, in tonnes per hour of saleable product.

This calculator needs JavaScript. You can still read how the numbers are worked out below, including a worked example.

Your numbers

Updates as you type

Time

All calendar hours in the period: 24 for a day, 720 for a 30-day month

Planned maintenance stops and scheduled grade-change washes, left out of OEE

Sheet breaks and wet-end stops, felt and wire problems, drive and dryer failures, steam and power interruptions

Output

Rated machine rate: tonnes per hour at the design speed and grammage (a 960 tonne-per-day machine is 40 per hour)

Everything produced in the period, on-spec or not, in tonnes of paper

Tonnes of saleable paper that met grade first time, with no downgrade or broke

Your result

Free, no sign-up

Check the highlighted fields to see your result.

Get your full OEE loss report

Your results as a PDF, with the on-stream factor and TEEP, plus our free OEE Loss Tracker (Excel) to log every period and line.

  • Your result above stays free. You never need to sign up to calculate.

By submitting, you agree to be contacted about PlantOps360. See our Privacy Policy.

How this OEE calculator works for Paper and Pulp

OEE (overall equipment effectiveness) is the share of what a paper machine could have made at its rated rate, in the time it was planned to run, that came out right first time. It multiplies availability (run time ÷ planned production time), performance (actual rate while running ÷ rated rate) and quality (on-spec output ÷ total output). Planned shutdowns are left out of planned production time. The full method, including how to choose the rated rate and how batch plants are handled, is on the OEE calculator for process industries page.

OEE = Availability × Performance × Quality

Worked example

A paper machine has a rated rate of 40 tonnes an hour and runs through a 30-day month. In the calculator above this is the starting example: a period of 720 hours with 24 hours of planned shutdown, so planned production time is 696 hours. Unplanned stops take 70 hours, so the plant runs for 626 hours. It makes 21500 tonnes of paper, of which 19800 tonnes of paper are on-spec, against a rated rate of 40 tonnes of paper an hour.

FactorCalculationResult
Availability626 ÷ 69689.9%
Performance(21500 ÷ 626) ÷ 4085.9%
Quality19800 ÷ 2150092.1%
OEE89.9% × 85.9% × 92.1%71.1%

Against the whole 720 hours the plant ran 86.9% of the time (the on-stream factor) and TEEP is 68.8%. The planned shutdown is not an OEE loss, but it shows in these calendar-time figures.

The losses that matter in Paper and Pulp

A paper machine runs continuously at high speed, and a single sheet break can stop it. Grade changes and broke (paper made but not sold) are further losses that a count of tonnes alone does not show.

Loss in Paper and PulpCounted inWhat it looks like
Sheet breaks and wet-end stopsAvailabilityThe web breaks and the machine stops until it is threaded again
Felt, wire and roll changesAvailabilityStops to change worn clothing or rolls beyond the plan
Drive, dryer and utility failuresAvailabilitySteam, power or drive problems that stop the machine
Running below design speedPerformanceMachine held back to reduce breaks or by dryer capacity
Grade-change slow-downPerformanceTime at reduced speed while the machine moves between grades
Broke and downgraded paperQualityPaper that is repulped or sold at a lower grade

Measuring OEE properly in Paper and Pulp

Use saleable first-grade tonnes as the on-spec output and everything the machine makes, including broke, as the total. The machine’s rated rate changes with grade and grammage, so calculate for one grade at a time, or use a weighted rate and say so. A review of paper machine efficiency notes that many European mills still use a 1981 German guideline (Zellcheming Merkblatt II/81) that differs from OEE, so a mill’s own “efficiency” figure may not match this calculator’s result.

What do published figures say about OEE in Paper and Pulp?

Public benchmarks for paper machine OEE are thin. What exists:

  • A published review on measuring paper machine efficiency argues that European mills use a 1981 German method (Zellcheming Merkblatt II/81) that differs from OEE and should be standardised, so efficiency figures between mills are not directly comparable. ResearchGate
  • No audited OEE benchmark for paper mills was found.

For reference, the widely quoted 85% comes from Seiichi Nakajima's 1984 book on total productive maintenance as a minimum to strive for (90% availability, 95% performance, 99% quality), and oee.com notes it was set for discrete manufacturing. Across industries, Evocon's data from more than 3,500 machines puts the typical plant nearer 55–60%. There is no audited benchmark for any single industry, so judge your line against its own trend and keep the definitions the same each time.

How maintenance software helps

  • Record every sheet break and stop with a cause code and section (wet end, press, dryer, reel), so the repeat causes show.
  • Plan preventive maintenance on dryers, drives, felts and rolls by running hours, in the planned maintenance stop.
  • Track critical spares for the machine (rolls, bearings, drive parts) so a failure is not waiting for a part.

More for Paper and Pulp

OEE calculators for other industries

Not your industry? Pick another one below, or search at the top of the page.

Process plants: continuous and batch How it is calculated

Production lines: parts, packs and units How it is calculated

Is your industry or kind of plant missing? Tell us what to add and we will look at building a calculator for it.

Frequently asked questions

How is paper machine efficiency different from OEE?
Many mills report an efficiency figure from a traditional method that differs from OEE. OEE separates availability, performance and quality and measures against planned production time, so the two figures are not directly comparable.
How do I count broke?
Broke is paper made but not sold as first grade, so it is a quality loss. Count it in total output but not in the on-spec output.
Should grade changes count as a loss?
Time stopped for a grade change beyond your standard is downtime, and slow running during the change is performance loss. Planned grade-change washes can be treated as planned stops if you say so.
What is a good OEE for Paper and Pulp?
There is no audited benchmark for this industry. The 85% figure was set for discrete manufacturing, and across industries the typical plant is nearer 55–60%. Compare your line with its own trend, using the same definitions each time.
How do you calculate OEE for Paper and Pulp?
Multiply availability (run time divided by planned production time), performance (actual rate while running divided by the rated rate) and quality (on-spec output divided by total output). Planned shutdowns are left out of planned production time.

Want help reading your OEE results?

Book a 30-minute OEE review with our team
PlantOps360

See PlantOps360 on your plant data

Book a 30-minute guided walkthrough tailored to your maintenance operations.

Personalized to your assets & workflows
See AI work orders & BI live
No commitment — bring your questions
Your details stay private. No spam, ever.